Description of pellet burners BurnPell HYBRID


Pellet burner BurnPell HYBRID - easily maintained, comfortable and modern heating system with pellets for residential, public and commercial premises. Pellet burner BurnPell HYBRID - most innovative pellet burner on the market. The breakthrough technology is synergy of Hybrid drive system and combustion chamber fuel mixing technology. With pellet burner BurnPell HYBRID you can burn wood biomass pellets.

Pellet burners BurnPell HYBRID are characterized with steeples regulation of settings allowing for usage in all types of ovens or heating boilers. In case when exchange of burner is done in an old boiler, then it is not necessary to make changes in existing installation. Firing up, sustaining fire after reaching preset temperature and feeding fuel is automatic. 

Unique solutions used in BurnPell HYBRID burners are patented technologies of overpressured burning, which eliminate problem of back burning, Hybrid drive system and combustion chamber fuel mixing technology, which prolongs the time of maintenance-free work, it is also a broadband lambda probe – available to all types of burners – which improves burning process and reduces fuel consumption. 

BurnPell HYBRID burners are used in households, bakeries, hotels, public utilities, schools and production halls or warehouses. They are made of acid-proof steel and they are equipped in best quality parts available on the market. The product, which you have at your disposal, is the highest quality, most technologically advanced burner available on the market.

BurnPell HYBRID burners are divided into 2 groups:
1.    BurnPell HYBRID Mini
2.    BurnPell HYBRID 

Pellet burners BurnPell HYBRID Mini

BurnPell HYBRID Mini burner is build from two parts: inner part - burning chamber and outer part, which is covered by plastic cover. Under the cover Hybrid drive is located, igniter for burning up fuel is mounted, socket for electrical connections and electronics. Multi socket is located on rigt side of the burner; plug of the controller is connected into it. In top part of the cover there is a pouring pipe, to which a plastic pipe, connecting burner with fuel hopper, is mounted. The cover of burner does not have any protruding and sharp parts. It does not threat one’s health. The temperature of burner’s cover during operation should not exceed 50ºC with exception of places of raised temperature, i.e. bakery.

Burning chamber is made of two parts:
  • Removable grate, made of heat-resistant steel, with holes of air intake to grate finished inside with a wall with holes for air supply, a hole for heater which burns up fuel, a hole for flame sensor and inner pipe, in which a spiral feeding fuel to furnace.
  • Covering part made of stainless steel, which serves as a coat, making space for free airflow into furnace, which is cooled and aired.

Pellet burners BurnPell HYBRID
 
BurnPell HYBRID burner is built from two main parts: inner pipe, which is a burning chamber and outer part, which is covered with plastic cover. Under the cover Hybrid drive is located, igniter for burning up fuel is mounted, socket for electrical connections and electronics. On the right side of burner, there is a multi-socket protruding to which the plug of the controller is connected. In upper part of the cover, there is a pouring chimney with barrier. To the chimney a pipe connecting with fuel feeder is connected. The cover of burner does not have protruding, sharp parts and does not threat one’s health. The temperature of cover during operation should not exceed 50ºC with exception of places of raised temperature, i.e. bakery.

Burning chamber is made of two pipes:
  • Inner pipe of furnace, made of heat-resistant steel with holes for airflow to furnace, finished from inside with a wall with holes for air intake, a hole for igniter which burns up fuel, hole for flame sensor and outside pipe, in which there is a spiral for feeding fuel to furnace.
  • Outside covering pipe made of stainless steel, which serves a role of a coat creating space for free airflow among pipes, which cools and airs the furnace. 

Pouring chimney is mounted to rectangular hole in upper part of the burner’s cover. Inside the chimney there is a steel barrier with counterweight. The barrier prevents against back burning to the feeder.

Note: It is important that counterweight is not blocked in any way. 


Fore detailed description of the pellet burners please look at their assortment list.